共搜索到5525条信息,每页显示10条信息,共553页。用时:0小时0分0秒437毫秒
; Abstract: U-channel forming... topography of galvannealed steels can be improved by increasing die hardness. However, the hardness should not be too high. ⊙ Key words: surface topography; galvanized steel; sheet metal forming; U-channel......
Springback characteristics in U-channel forming of tailor rolled blankHuawei ZHANG 1), Lizhong LIU 1), Ping HU 1) and Xianghua LIU 2)( 1) School of Automotive Engineering, Faculty of Vehicle... of finished parts considerably. Springback characteristics of unannealed and annealed TRBs were investigated by means of numerical simulation and experiments taking U-Channel as an example. TRBs were......
......
Forming limits of nickel coating on right region ZHOU Li-qun(周里群)1, 2, LI Yu-ping(李玉平)1, ZHOU Yi-chun(周益春)2 1. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China; 2...; Abstract: The forming limits......
that width and depth of micro channel increase with the increases of voltage with a certain die depth, moreover, forming depth reaches the maximum at 7 500 V. And then rebound emerges and forming depth decreases. Forming depth and width of channel increase with the decease of die depth at a certain voltage; and forming depth reaches maximum at 0.5 mm of die depth. Therefore, rebound is weakened......
Theory and application research development of semi-solid forming in China LUO Shou-jing(罗守靖)1, W. C. KEUNG(姜永正)2, KANG Yong-lin(康永林)3 1. School of Materials Science and Engineering, Harbin... recognition, application fields exploiting, developing of billets (slurries) preparation technologies with low cost and special equipments. The prospect of semi-solid forming development path in China......
......
FERROELECTRIC CHARACTERISTICS OF SrBi2Ta2O9 THIN FILMS ANNEALED IN FORMING GAS A.D.Li1,N.B.Ming1,D.S.Wang2,Z.G.Liu1,D.Wu1,T.Yu2,A.Hu2 (1.Department of Material Science and Engineering & National..., China) Abstract:The degradation behavior of SrBi2 Ta2O9 (SBT) thin filras annealed in forming gas (5%H2+95%N2) was investigated. The ferroelectric remnant polarization Pr of SBT had a severe decrease......
......
Evaluation of forming limit in viscous pressure forming of automotive aluminum alloy 6k21-T4 sheet WANG Zhong-jin(王忠金)1, LI Yi(李 毅)1, LIU Jian-guang(刘建光)1, ZHANG Yi-he(张义和)2 1. School...; Abstract: A ductile fracture criterion is introduced into numerical simulation to predict viscous pressure forming limit of the automotive body aluminum alloy 6k21-T4. The material constant......